▲Page Top

	Sanwa Electric Instrument Co., Ltd.	Sanwa Electric Instrument Co., Ltd.

Clamp Meters




DC/AC current measurable max. 2000A, CAT.IV 1000V

  • Dual display shows voltage/current and its frequency
  • EF (Electric Field) detection
  • VFD (Variable Frequency Drive) frequency measurement
  • Low input impedance voltage measurement capable of attenuating the effects of ghost voltages
  • Peak hold (Interval: 5 ms)
  • Auto power save (30 min./Cancelable)


Function Measuring range Best accuracy Resolution
ACA 200.0/2000A ±(2.0%+5) 0.1A
DCA 200.0/2000A ±(2.0%+5) 0.1A
ACV 6.000/60.00/600.0/1000V ±(1.2%+5) 0.001V
DCV 6.000/60.00/600.0/1000V ±(0.5%+5) 0.001V
Resistance 600.0/6.000k/60.00k/600.0k/6.000M/40.00MΩ ±(0.5%+5) 0.1Ω
Frequency 10~1999Hz ±(0.1%+4) 0.01Hz
Capacitance 60n/600n/6μ/60μ/600μ/2000μF ±(2.0%+5) 0.01nF
Continuity Buzzer sounds at below 10-200Ω Open voltage: approx. 0.5V
Diode test Open voltage: approx. 1.8V
EF sensing A voltage or electric field of about 60 V or more is detected. The bar graph and intermittent buzzer beeps change in three steps according to the field intensity. (50/60Hz)
Sampling rate Approx. 5 times/sec.
Bandwidth 50~400Hz
Display 6000/1999(Hz)
Max. overload protection input DC/AC1100V
CT: DC/AC2000A
Clamp diameter/Conductor size Φ55mm/20x66mm
Battery R6Px2
Battery life A function: Approx. 80 hrs. Functions other than A: Approx. 240 hrs. (Zinc-carbon battery/Backlight off)
Size/Mass H264×W97×D43mm/Approx. 640g
Safety standards IEC61010 CAT.Ⅳ1000V