Clamp Meters
DC/AC+True RMS
DCM600DR
Suitable for maintenance of vehicle, hybrid vehicle, EV & DMM functions
Calibration available products
Calibration available products
- AC/DC current measurable max. 600A
- Peak hold (Interval: 1ms)
- Auto power save (30min./Cancelable)
- Max
600A - True RMS (True root-mean-square value)
- True RMS value. AC current and voltage of a non-sine wave can be measured by true RMS values.
- DC / AC measurable
- Both ACA and DCA are measurable.
- Continuity buzzer
- The buzzer sounds when the measuring object is electrically conducting.
- peak hold
- The peak value like in-rush current is indicated. The minimum pulse width capturable differs according to models.
- Auto power save
- The display disappears to bring the device into the power-save state when a certain time has passed after power-up. Some models have a function to cancel this function.
- Data hold
- A value indicated on the display is fixed. It is fixed even after the test lead is removed, and can be used as a record for reference purposes.
- Measurement of relative value
- A certain measured value is assumed as 0 and measured values after that are expressed by positive or negative values relative the value fixed as 0.
- Backlight
- Allows indicator reading in a dark place.
Move your mouse pointer over or click on an icon to see a description of the icon.
Specifications
Function | Measuring range | Best accuracy | Resolution | Input impedance |
---|---|---|---|---|
DCA | 60/600A | ±(2%+5) | 0.01A | |
ACA | 60/600A | ±(2%+5) | 0.01A | |
DCV | 600V | ±(1%+2) | 0.1V | 1MΩ |
ACV | 600V | ±(1.2%+5) | 0.1V | |
Resistance | 999.9Ω | ±(1%+7) | 0.1Ω | |
Continuity | Buzzer sounds at less than 40Ω Open voltage: approx. 2.9V |
Sampling rate | 3 times/sec. |
Bandwidth | 50-500Hz |
Display | 6000 |
Clamp diameter/Conductor size | Φ30mm/10×50mm |
Battery | LR03×2 |
Battery life | Approx. 40 hrs. (Backlight off) |
Size/Mass | H208×W69×D38mm/Approx. 260g |
Safety standards | IEC61010 CAT.Ⅲ600V |