• True RMS (True root-mean-square value)

  True RMS value. AC current and voltage of a non-sine wave can be measured by true RMS values.

• Frequency

  Expressed in the unit of Hz (hertz). Commercial frequency of 50Hz/60Hz can be measured.

• Capacitor

  Capacitor capacity (electrostatic capacity) is measured and expressed in the unit of F (farad), μF, etc.

• Duty cycle

  The duty cycle of repeating waveform is indicated on a percentage basis (%). It can be used for the analysis of control signals.

• Continuity buzzer

  The buzzer sounds when the measuring object is electrically conducting.

• Auto power off

  Power is automatically turned off when a certain time has elapsed after power-up. Some models have a function to cancel this function.

• Data hold

  A value indicated on the display is fixed. It is fixed even after the test lead is removed, and can be used as a record for reference purposes.

• Range hold

  The range is fixed in the measurement of varying voltage and current which is difficult to read in the auto range.

• Measurement of relative value

  A certain measured value is assumed as 0 and measured values after that are expressed by positive or negative values relative the value fixed as 0.

• MAX / MIN

  The maximum value and the minimum value are displayed or recorded. The recorded value can be seen later on the display.

• Low power ohm

  Resistance is measured by applying voltage of approximately 0.4V or less on a measuring object. It is characterized by the fact that the semiconductor does not conduct at approximately 0.4V or less even in forward direction.

Move your mouse pointer over or click on an icon to see a description of the icon.