• True RMS (True root-mean-square value)

  True RMS value. AC current and voltage of a non-sine wave can be measured by true RMS values.

• Frequency

  Expressed in the unit of Hz (hertz). Commercial frequency of 50Hz/60Hz can be measured.

• Capacitor

  Capacitor capacity (electrostatic capacity) is measured and expressed in the unit of F (farad), μF, etc.

• Duty cycle

  The duty cycle of repeating waveform is indicated on a percentage basis (%). It can be used for the analysis of control signals.

• Continuity buzzer

  The buzzer sounds when the measuring object is electrically conducting.

• EF function

  Non-contact AC voltage detection

• Auto power off

  Power is automatically turned off when a certain time has elapsed after power-up. Some models have a function to cancel this function.

• Data hold

  A value indicated on the display is fixed. It is fixed even after the test lead is removed, and can be used as a record for reference purposes.

• Range hold

  The range is fixed in the measurement of varying voltage and current which is difficult to read in the auto range.

• Measurement of relative value

  A certain measured value is assumed as 0 and measured values after that are expressed by positive or negative values relative the value fixed as 0.

• MAX / MIN

  The maximum value and the minimum value are displayed or recorded. The recorded value can be seen later on the display.

• Low power ohm

  Resistance is measured by applying voltage of approximately 0.4V or less on a measuring object. It is characterized by the fact that the semiconductor does not conduct at approximately 0.4V or less even in forward direction.

• Backlight

  Allows indicator reading in a dark place.

Move your mouse pointer over or click on an icon to see a description of the icon.