SE300

Non-contact Digital Tachometer

Calibration available products

Designed in pursuit of the ease of holding to enable stable measurement
Long detection distance in non-contact measurement (max. approx.50 cm) enabling measurement from a distance from the rotating object
Auto power OFF function (approx. 2 min., cancellation possible) and Bright backlight
MAX/MIN display function
Fixed installation possible using a commercially available camera tripod

* Contact measurement capability using the optional ENC-3

Auto power off
Power is automatically turned off when a certain time has elapsed after power-up. Some models have a function to cancel this function.
Data hold
A value indicated on the display is fixed. It is fixed even after the test lead is removed, and can be used as a record for reference purposes.
MAX / MIN
The maximum value and the minimum value are displayed or recorded. The recorded value can be seen later on the display.
Backlight
Allows indicator reading in a dark place.

Move your mouse pointer over or click on an icon to see a description of the icon.

Display	99999
Sampling	Approx. 1 sec (rpm, rps, cycle, m/min, m/s) Approx. 0.1 sec (count)
Reflection detection distance	約50 to 500 mm
Powe supply	R6P/LR6 1.5V×2
Battery life	Approx. 28 hours
Dimensions/mass	H210×W60×D50 mm/Approx. 218 g

Measurement mode	Non-contact measurement	Contact measurement(with *ENC-3)	Accuracy
rpm	30.0～99999	30.0～19999	±(0.03%+1)
rps	0.50～1600.0	0.50～333.00
ms	0.600～1999.0	3.000～1999.0
count	0～99999	0～99999
m/min	-	3.0～1999.0
m/s	-	0.05～33.00