Tachometer/Speedometer
Speedometer
SE9100
Speedometer for elevator/lift and measurement of escalator emergency stop distance
Calibration available products
Calibration available products
- Speed of high speed elevator can be measured up to 2000.0 m/min
- Two independent data hold (CH1/CH2) functions plus maximum value hold function
- Memory storage of held value and maximum value
- Data hold by external triggering
- Movement average value display (average frequency setting can be set at any of 1 to 10 times)
- Analog output of measurement value
- Measurement of emergency stop distance for a escalator
- Logging
- The reading can be stored in the meter itself.
- Auto power off
- Power is automatically turned off when a certain time has elapsed after power-up. Some models have a function to cancel this function.
- Data hold
- A value indicated on the display is fixed. It is fixed even after the test lead is removed, and can be used as a record for reference purposes.
Move your mouse pointer over or click on an icon to see a description of the icon.
INSTRUCTION MANUAL
PRODUCT CATALOGRemote control/Analog output function
Specifications
| Measurement ranges | Linear velocity: 0.1 to 2000.0 m/min Rotation speed: 1 to 20000 r/min Distance: 0 to 999 mm |
| Sampling rate | 200 ms |
| Accuracy | ±2dgt (*Electrical operation) |
| Analog output | DC 0 to 2V Accuracy: ±(0.5% rdg＋1 mV) |
| Data hold | CH1/CH2/Max. value All independently CH1/CH2: Hold by Main Unit panel or External triggering |
| Power supply | LR6 1.5 Vx4 |
| Battery life | Approx. 20 hours |
| Size / Mass | H183×W50×D50 mm / Approx. 520 g |
*At 1000.0 m/min, 1 dgt corresponds to 0.1 m/min.
