DLC470

Multifunctional leakage clamp meter

Calibration available products

Extract frequency range of mainly ACmA 50Hz/60Hz and ACA, with band-pass filter (BPF) function.
MAX/MIN value hold
Auto power off (30 min./Cancelable)
Leakage current measurement Resolution 0.01mA

Max
400A
Leakage current
A clamp meter that can make the measurement of leakage current have a range to allow measurements in milliamp.
Continuity buzzer
The buzzer sounds when the measuring object is electrically conducting.
BandPass Filter
Pass through a particular frequency and will reduce other bandwidth.
Auto power off
Power is automatically turned off when a certain time has elapsed after power-up. Some models have a function to cancel this function.
Data hold
A value indicated on the display is fixed. It is fixed even after the test lead is removed, and can be used as a record for reference purposes.
MAX / MIN
The maximum value and the minimum value are displayed or recorded. The recorded value can be seen later on the display.
Backlight
Allows indicator reading in a dark place.

Move your mouse pointer over or click on an icon to see a description of the icon.

Function	Measuring range	Best accuracy	Resolution
ACmA	60.00mA/600.0mA	±(1.2%+5)	0.01mA
ACA	60.00A/400.0A	±(1.2%+5)	0.01A
ACV	600.0V	±(1.2%+5)	0.1V
DCV	600.0V	±(1.0%+2)	0.1V
Resistance	999.9Ω	±(1.0%+8)	0.1Ω
Continuity	Buzzer sounds at 30Ω or below Open voltage： approx. 0.9V

Sampling rate	2 times/sec.
Bandwidth	40-400Hz
Display	6000 (A/V)/9999 (Ω)
Clamp diameter/Conductor size	Φ35mm/10x40mm
Battery	LR03×2
Battery life	Approx. 42 hrs.（Alkaline battery/Backlight off)
Size/Mass	H206×W83×D38mm/Approx. 320g
Safety standards	IEC61010 CAT.Ⅲ600V