Laser Power Meters / Environmental Meters

LP10Laser Power Meter

Measurement range (CW laser): 0.01μW~40.39mW
Customization of wavelength to 400 ~ 1100 nm is available by factory default setting.

Pocket size.
Separate light sensor probe can be integrated with the main body for measurement.
4039 full-scale count with a bar graph display.
Direct reading of the laser power of the reference wavelength of 633 nm, while the laser power of other wavelengths can be read by converting it according to the spectral sensitivity characteristic table.
Wide measuring range from 0.01 μW to 40.39 mW.
MIN/MAX hold functions.
The diffusion sheets are used in the sensor, it can suppress the "return light" that is generated when a laser light enters the sensor.
Auto power save function prevents wasting of battery power.

Auto power save
The display disappears to bring the device into the power-save state when a certain time has passed after power-up. Some models have a function to cancel this function.
MAX / MIN
The maximum value and the minimum value are displayed or recorded. The recorded value can be seen later on the display.

Move your mouse pointer over or click on an icon to see a description of the icon.

Stick-shaped small light sensor (window diameter 9 mm) for narrow position or area

Easy-to-carry pocket size.
Separate, stick-shaped light sensor (window diameter 9 mm) from the main body enables measurement of a narrow position or area. The light sensor can also be integrated with the main body for measurement.
4039 full-scale count with a bar graph display.
Improved measurement accuracy by using a silicon photodiode, which has a spectral sensitivity approximating the relative luminous efficiency specified by CIE (Commission Internationale d'Eclairage), in the light sensor.
Wide measuring range of 0.1 lx to 403.9 klx (403,900 lx).
Data hold function.
Auto power save function prevents wasting of battery power.

Auto power save
The display disappears to bring the device into the power-save state when a certain time has passed after power-up. Some models have a function to cancel this function.
Data hold
A value indicated on the display is fixed. It is fixed even after the test lead is removed, and can be used as a record for reference purposes.

Move your mouse pointer over or click on an icon to see a description of the icon.